 |
 |
 |
 |
  |
  |
  |
  |
  |
  |
  |
  |
  |
 |
Telephone
Birmingham 0121-360-9682 Staffordshire 01889-578699 |
|
||||
|
||||
| A built up roof membrane consists of two or more superimposed layers of a bitumen roofing sheet which is bedded and bonded with hot bitumen or fused together by torch application method. This multi-layer system gives more levels of defence against water ingress. | ||||
 |
 |
|||
Before
|
After
|
|||
 |
||||
| The ideal membrane combines a base of high stiffness and tension, with low stiffness matrix to provide the best combination of characteristics to resist movement and maintain waterproofing integrity. | ||||
There are numerous systems available including refurbishment torch on systems and cut to fall insulation systems. Torch on is a means of adhering membranes for built up roofing which involves activating a factory applied layer of bitumen using a gas torch. As members of the C.O.R.C. we are fully informed on the new building regulations 'Part L1 and L3' in accordance of the conservation of fuel and energy. Insuring our high specifications are HFC and CFC free insulations. |
||||
| Project Examples | ||||
| Project One: | ||||
 |
 |
|||
Before
|
After
|
|||
| Project Two: | ||||
 |
||||
Project
Three:
|
||||
 |
 |
|||
 |
 |
|||
 |
 |
|||
Our major suppliers
for this service are:-
|
||||
    |
||||
Our flat roofs are membranes installed in accordance with BS 8217; 1994 Code of Practice for built up roofing specifications. The application follows the recommended good practices for torch-applied membranes. |
||||
